Fresh Tub Refinishing
Project Location: Van Nuys, CA (Hazeltine Ave)

Restoring a Damaged & Peeling Unit

A complete restoration of a plastic tub/wall unit in a Van Nuys apartment complex. We fixed deep chips on the shelving, repaired holes, and removed peeling paint.

Chipped corner of plastic bathtub shelf Before
Deep chip on integrated shelf
Completely refinished bathtub and walls After
Restored to factory-new condition
8 Hrs
Time to Finish
$6,800
Client Saved
Plastic
Material Type
Apt
Property Type
Apartment complex in Van Nuys

Residential Complex on Hazeltine Ave, Van Nuys

Project Overview

The Problem

The client had a one-piece plastic unit that had failed significantly. The previous coating was peeling in sheets near the shower rod fixtures due to poor adhesion. Additionally, there were deep impact chips on the integrated soap shelf and small puncture holes in the tub floor causing potential leaks.

Our Solution

Replacement would have required demolition and cost over $7,000. Instead, we performed a full restoration in just 8 hours.

"I’m very happy with the result. The bathtub and walls were in really bad shape before... now everything looks completely new."
– Tim S., Client

The Restoration Process

See how we fixed the damage step-by-step

Peeling paint near shower rod
01

Assessing Adhesion Failure

Severe peeling was visible near the shower rod. The old paint was coming off in large flakes because the surface wasn't prepped correctly by the previous contractor.

Failed DIY Coating
Hole in bathtub surface

Fixing Impact Damage

02

Small holes and chips like this can cause water leaks into the structure. We carefully drilled out the damage, filled it with reinforced compound, and sanded it perfectly flush.

Structural Repair
Sanded and prepped bathtub
03

The Matte Finish (Prep)

This is the most critical step. We stripped the old paint and mechanically sanded the entire unit to a matte finish. This ensures the new coating bonds chemically and physically to the plastic.

Surface Bonding
Final glossy finish detail

The Final Gloss

04

A close-up of the final result. The tub is smooth, incredibly glossy, and durable. It looks and feels like a brand new factory unit.

Ready in 24 Hours

Planning Refinishing for a One-Piece Tub and Shower Unit

The fixture in this project combines the bathtub and walls in one unit. Corners, shelves and the areas around fittings are part of the surface assessment, alongside the basin itself. Wider photographs help show how the damaged finish extends through the enclosure.

For a similar unit, include the full tub and walls, then close-ups of worn coating, chipped areas and previous repairs. Tell us about any flexing or leaks. The preparation and coating scope needs to be confirmed for the material and condition of the complete fixture.

Learn more about shower refinishing and refinishing in Van Nuys.

Get Your Free Refinishing Quote

Fill out the form below to receive a personalized quote for your refinishing project in Los Angeles.

0/500 characters

Your information is secure and will only be used to contact you about your refinishing project.